FLOWFILL

Flowable crack filler

Supplier reference under review

Supplier specifications — verification required

Original supplier excerpts in English. Confirm against the current technical and safety sheets before use.

Packaging: 28 Packaging | 7.56 L (2 US gal), 37.8 L (10 US gal)
Mix ratio: 15 FLOWFILL is a two-component, solventborne polyurethane system. Its high penetration and fast setting allow for very quick repair of damaged joints, spalling, and cracks. Fillers such as sand or gravel can be added for repairing larger holes and defects. / 23 * Easy 1:1 mix ratio by volume / 31 Mix Ratio (by volume) | A:B = 1:1 (100:100) / 32 Mix Ratio (by weight) | A:B = 94:113 / 55 Surface Preparation / 57 New concrete must cure for a minimum of 30 days. It must reach at least 25 MPa (3625 psi) compressive strength and 1.5 MPa (218 psi) tensile strength. Mechanical preparation is required to remove surface laitance. / 59 Mix each component separately. Pour Part B into Part A using the proper ratio. Mix both components for no more than 20 seconds. Only prepare the amount that can be applied within the pot life.

Pricing, stock and TDS/SDS pending confirmation.